SCS-MI Modular Metal Truck Scale
Kejie SCS-MI Modular Metal Truck Scale with a maximum capacity of 60 tonnes is the ideal solution for weighing of motor vehicles or farm tractors under not very harsh conditions. Measurement with the analogue version is done by compression load cells made entirely from steel with an IP 68 protection rating. The electronic terminal, which displays the weight and the secondary functions, completes the weighing system. It offers greater reliability, much lower transportation cost, faster installation, and easier maintenance than weighbridges from other Chinese suppliers.
Technical Index of SCS-MI Truck Scale/Weighbridge
Accuracy Class: III
Rated capacities: 10, 20, 30, 40, 50, 60t
Widths of platform: 3, 3.4, 3.5, 4m
Lengths of platform: 9, 10, 12, 14, 15, 16, 18, 20, 22, 24m
CLC (Concentrated Load Capacity): 10t
Foundation: above ground or pit type
Division: 15kgs or 20kgs
1.Modularized structure, specially for light industry weighing
2.Finite Element Analysis of Kejie truck scale/weighbridge under excessive loading and usage conditions
The SCS-MI truck scale/weighbridge design was refined by one of Chinese leading structural engineering consulting firms. The design was modeled using state of the art software and then a finite element analysis carried out under overloading and point loading conditions. The model also simulated the results of thousands of weighings. This information was used to further strengthen and refine the design of the weighbridge.
3.Rigid enough for light industry weighing
Full diamond top plate, the thickness is 6mm; 6 pieces of I-beam and 4 pieces of C-beam in each bridge section. The SCS-MI truck scale is the ideal solution for weighing of motor vehicles or farm tractors under not very harsh conditions.
4.Competitive price for the whole SCS-MI truck scale
Special design for light industry, very good price.
5.High quality welding
We use CO2 Protection Welding and Shielded Arc Welding, standard fillet weld with no end, the minimum weld leg length is 5mm.
All welding of u-beams are processed on standard welding platform. Each welding platform is equipped with a press device, which can offer 160t pressure on weighbridge u-beams. After welding, the press will be kept on the u-beams for 24 hours to release the internal stress and avoid the structure deformation. All welding lines are tested by ultrasonic flaw detection.
6.Exceptional rust and corrosion protection, outstanding resistance to wear
Step 1: Sandblasting
External surfaces of all modules undergo complete sandblasting to remove any contaminants such as mill scale, welding gases, oli or other residue. We use a centrifugal steel shot blasting system which blasts a mixture of steel grit and steel shot simultaneously to remove contaminants. If the steel is not properly cleaned, paint will flake and wear away, diminishing its appearance, exposing the scale to the elements and shortening its lifespan. Although paint can initially hide much of this residue on a lower quality weighbridge, it will quickly appear once in the field. We use an intense cleaning process to remove all foreign materials and residue before painting to ensure proper bonding of the paint.
Sandblasting Cleaning: Sa3.0; Surface Roughness: 40~85μm
Step 2: Protective coating
After surface cleaning, the weighbridge is moved to dust-free painting room, and all steel surfaces are sprayed with a protective coating to prevent the steel from moisture.
Step 3: 2 coatings of epoxy zinc primer
Eight hours after protective coating, all weighbridge surfaces are sprayed a coating of high performance epoxy zinc primer. Twenty-four hours under constant temperature of 25℃, another coating of epoxy zinc primer will be sprayed. The thickness of 2 primers is over 60 micron.
Step 4: 1 coating of alkyd enamel finish
Twenty-four hours after the 2nd primer, high quality alkyd enamel finish is applied. The thickness of the finish is over 50 micron.
7.More pieces of weighbridges can be loaded into a 40ft container
Our SCS-MI Modular Metal Truck Scale/Weighbridge is specially designed as per the inner dimension of 40ft container. The full use of container is to the utmost. For example, for 2 units of 18x3m and 1 unit of 16x3m, truck scales/weighbridges, we need only one 40ft general purpose container to fit.
8.The delivery time is short
The modularized structure ensures us to keep enough modules in stock. That means we can deliver in very short time. For 2 units 3x18m truck scale, we need only 15 days to deliver.
9.Fast and economical installation, even in restricted sites
Our SCS-MI Modular Metal Truck Scale/Weighbridge is humanized structure. During assembling, no need to turn over the bridges. It takes about 4 hours to finish installation of 1 complete set 3x18m weighbridge. Only one 3t forklift can finish all work of truck scale/weighbridge assembling.
Removable section covers allow convenient access for maintenance and service.
11.No exposed wiring
12.Low profile design
13.Full capacity test weights calibration for weighbridge before leaving factory.